@georgemathew61365 years agoThanks a lot for the video. How would i know if i need to change the upstream o2 sensor or downstream one? 7
@
@losteroni2 years agoThis may not work for everyone but it worked for me. After trying everything for 2 weeks i realized my o2 monitors had gone to sleep and needed to be id="hidden1" woken up so i disconnected both o2 sensors and started the engine then waited for the check engine light to come on which it did in about 30 seconds, then i re-connected the sensors and used my tool to erase the code and drove a couple of days (maybe 5 normal drive cycles) and the o2 monitor finally set. ...Expand5
@
@RANDOMFIX5 years agoUpdate oxygen sensor monitor video Look HERE, Vehicle Spe cific Drive Cycles for your vehicle is below. />Complete Smog Playlist 12 Minute Actual Drive Demo EMISSION INSPECTION MONITOR Readiness (I/M) Acura Drive Cycle Audi Drive Cycle BMW Drive Cycle Chrysler Smog Readiness check Chrysler Smog procedure Ford Drive Cycle Gm Drive Cycle Honda Drive Cycle Honda Smog Readiness Hyundai Drive Cycle Infiniti Drive Cycle Isuzu Drive Cycle Jaguar Drive Cycle Kia Drive Cycle Land Rover Drive Cycle Mercedes Benz Drive Cycle Mini Cooper Drive Cycle Mitsubishi Drive Cycle Nissan Drive Cycle Porsche Drive Cycle Subaru Drive Cycle Volkswagen Drive Cycle Volvo Drive Cycle Catalyst monitor not ready? Catalyst Monitor Cheat Catalyst not ready? Watch this video Evap monitor not ready? EGR monitor not ready? Oxygen sensor not ready? Oxygen sensor replacement Oxygen sensor heater element testing Link to Scanner in video Video about recommend Full Color Scanner Link to this full-color scanner Lucas Fuel Treatment Car Memory / Data Saver Link to Scanner in video Video about recommend Full Color Scanner Link to this full-color scanner .....Expand
@
@tadas36345 years agoMercedes clk430, just went through this smog hell. Watched all the videos and read all the good tips but the o2 sensor problem continued even after changing. ...Expand8
@
@thefitzyspecial2 years agoYou dont have a drive cycle link for fiat 500 (abarth) is there a cycle that you have a link for that will work with fiat? Having issues with o2 sensor readines. Thanks!
@
@RareAirTwo4last yearDo you have a drive cycle for a 2015 dodge challenger 3. 6l v6? My pre-test had everything ready but o2 sensors.
@
@allan116942 years agoI own a 2011 toyota rav4. I recently disconnected the battery to clean the terminals. When i went for emissions testing it wouldn' t pass due to catalyst. ...Expand2
@
@prospexican5 years ago2005 escalade v8 taking over 50 miles to reset heater 02 snr monitor, ir has 2 front and 2 rear 02 sensors. My scann tool says the draw 1 amp each at 02. ...Expand1
@
@Snkrhead9763 years agoI have a 2004 dodge ram 1500 3. 7l. I just recently changed the upstream and downstream o2 sensors and im still receiving a check engine code for p0171 and p0174. I have also had spark plugs replaced.
@
@edludwig4532 years agoI had the o2s & htr codes on my eck test says the monitor not ready so i replaced all four sensors but i still get the same thing, no ck eng. Light. ...Expand1
@
@anthonymarquez4563last yearHope this cat a clean helps! Ive got an 06 wrx and have driven over 350 miles. Last reset i did over 120 miles and o2 hasnt been ready. Cleaned the maf. ...Expand1
@
@lalolalo12332 years agoHi, my 09 altima still hasn' t clear the " o2 sensor htr" monitor, can you tell me which sensor would that be, the downstream or upstream?. ...Expand
@
@dannysanchez1364 years agoMy monitors arent ready but everything else passed. No cel. Dealer said to replaces the front 02 sensors on a 5th gen camaro. Would that be the solution to have the monitors turn on.
@
@travelvlogues3 years agoHi! I am still unable to make my o2s sensor ready (nissan xterra 2012) everything else is ready. I can' t understand though why mechanics are keep. ...Expand
@
@oegesauto56192 years agoI have a kia 2012 sorento. Still having issues with my oxygen sensor saying incomplete. Should i try the cat clean? I have no check engine light. The drive cycle for this seems really complicated.
@
@rodenrren25 years agoWait. Is this a way " around it" or it wont pass if you actually need to replace a sensor? Which i guess wont even be cus the check engine light would be on.
@
@davidrabold28394 years agoIn my experience, if you are using a good obd reader,it will tell you up steam or down stream, and sensor 1 or 2. In the case of a true duel exhaust system the reader will let you know bank 1 (the side of the engine where is located) Or bank 2 ( the opposite side). For single exhaust cars most of time, bank 1 is upstream. .....Expand1
@
@bot-pd1cb4 years agoHey thanks for the video. I tried 4 times and still not passing. Any the mehcsnix3 says oxygen sensor all the time. How should i start off first before i go my 5th time? 2
@
@howlingmedia43545 years agoCan that scanner also check the catalytic converter monitor?
@
@rickysharma21605 years agoHello, i have a 2002 bmw 325ci and my oxygen sensor htr is ok but not my oxygen sensor monitor or my catalyst monitor? Do i need to get new 02 sensors? Thanks in advance.
@
@AlejandroRamirez-hd3wj4 years agoI have a 2011 chevy hhr and it says one of the oxygen sensors are not ready. Do i drive it 20 miles straight without turning off the vehicles or 20 miles in separate trips?
@
@Viktory2k12 years agoHello sir, i have a rather odd issue with my 01 deville. I bought the car in march 01 and had to go through emissions and it passed no problem. I had to. ...Expand
@
@EvLMusHroOoM3 years agoSubscribed and needed this information! Thank you very much! Good day to you sir! 2
@
@camaylove14 years agoThe dealer is telling me that the rear oxygen censor is bad on my car and that is why the mil light is on in my car. The manual states that it is a indicator. ...Expand
@
@CatsOfMarrakech2 months agoFor nissan the dealer had to update ecm software. This made the o2 sensor show ready which we drove hundreds of miles with the drive cycles. So again ecm software update.
@
@hl89355 years agoI am in california, i have a 96 nissan altima (auto) bought in arizona (2 catlytic convertors, 1 near engine, 1 after flex pipe) no code, but cat + o2 the car has newly changed flex pipe 2 weeks ago due to exhause leak, and has no exhaust leak to my best knowledge. Engine section has no leak (oil, vacuum) numerous cleaning are done before change flex pipe to get rid of cat + o2 not ready issue, such as seafoam. Batter is about 2-3 years old and voltage is normal. Downstream cat was taken down and put in soup overnight 2 times (tried to clean) i' ve tried driving pattern recommeneded by nissan official document in last 2 weeks. It' s driving pattern is not very general as seen in many post. No success after 5, 6 try. upstream cat (near engine) was not tested for temerature difference, as i am not sure how to test it. before changing flex pipe, cat + o2 not ready (no code) issue existed few months ago. I' ve attempted to get rid of it by clearning, such as mass sensor. the car idle is not 100% smooth, but ok. The car has no otherr know obvious issue. what should i to get rid of at least 1 of cat + o2 not ready issue? Thank you for help and advise. ...Expand1
@
@sannyvillalon33303 years agoI have a 2017 benz c300. It has a downpipe with no cel after putting it on. Ive driven it for over 500+ miles and no cel. I went to a shop to do my inspection readiness: fail monitor catalyst: not ready monitor o2: not ready. i was told by the shop that i need to drive it for an hour or two over 60mpb to have it activated then come back. But ive driven the car for 500+ miles, shouldnt that have gotten it ready? someone please help. ...Expand
@
@transformativewisdom3 years agoI had this pesky problem with my 2012 nissan rogue. I finally took it to a mechanic asked them to " complete the drive cycle" for me then smog it. My car passed and i picked it up in 3 hours. 2
@
@tulio35715 years agoWhich are the hardest monitors to set? Thanks. 1
@
@davidbrasse77233 years agoI have performed the drive cycle 7 times on a 2009 mercury mariner. The o2 & ho2 sensors still will not reset. The mercury drive cycle differs from. ...Expand
@
@Pinkielover7 months agoI want to get an emissions test and i got this as not ready so i failed because i had the evap one too. So there are two markers not ready well anyway. ...Expand1
@
@noahriding57802 years agoIs it possible to get this problem with a car that' s just not driven very much? Like a car that' s only used maybe 2 or 3 times a month, and very also you mentioned this sensor being near the heater circuit on many cars, does this mean you would increase or decrease success by turning up the heater before testing? Or turning it off?. ...Expand
@
@vonniofdoom55902 years agoThis is a very informative video, that cat clean is pretty legit, have your car running much better than before. You will pass your smog test in no time! 2
@
@esqueue5 years agoWhat' s unfortunate is that the people like myself that can' t get it to work can never do so. 4 sensors and parts later with hundreds of miles and . ...Expand2
@
@Ttvpimpm0nk3y69last yearMine 02 sensor not ready i drove and drove miles still not ready not having no symptoms of a bad 02 my cat also not ready not sure what to do 0b2 still says inc.
@
@allan116942 years agoThere are many states where an emission test is not required for registering a car. It' s great if you live in one of these states and not have to deal with it. 1
@
@arahernandez80605 years agoI have a 07 chevy tahoe and its not passing either. The evap, heated o2 sensor, oxygen sensor is not ready and the secondary air system, a/c refrigerant, egr flow and heated catalyst is not supported. Does this mean the computer system is not working? I took it 4 times already for the smog test after driving it in the high way. Please help!. ...Expand
@
@cookiemon874 years agoThe catalyst monitor is not showing. Any tips?
@
@JoseAyala-xs3js3 years agoI got a 2003 chevy tahoe and im trying to get the o2 sensors ready, i drove it 60+ miles and nothing as of yet.
@
@askdad3 years agoI had my bmw x5 35 d throttle body replaced and there is no more codes and drove about 130 miles but still have cat, o2s, hrt, egr not ready. Should i just . ...Expand
@
@Henny37735 months ago2019 ram2500 6. 4 how long do i gotta drive.
@
@stevenhernandez54804 months agoDrove my 2019 chevy malibu 100 miles and it hasnt passed. It hasnt gave me any codes but its the last one so i can get it smogged.
@
@daby83995 years agoMy emissions was rejected because of the o2 sensor monitor not ready and i believe it is because i just bought the car on july 28th on july 29th which. ...Expand1
@
@SuperZed213 years agoMy 2010 toyota corolla 1. 8l automatic recently failed an emissions test. O2 sensor and cat sensor are not ready. No pending or permanent trouble codes. ...Expand1
@
@mardo543219 months agoCan you help me sir i got this problem also, my car is suzuki every wagon turbo 10th generation.
@
@colingladfelter95204 years ago97 saab 900s, new cat back exhaust and 2 new o2 sensors and still 4 inc monitors:
@
@prettybaby805 years agoMy o2 refuses to set after one week left at the shop. Nothing wrong with the car replaced battery two months ago.
@
@beasyphone3 years agoFirst issue! Walmart scanner, but 2 years past, im sure you' ve learned that by now.
@
@neverendingstory83793 years agoMy o2 n catytic converter wont go ready ive been driving for like 100 miles already.
@
@kcsariano895 years agoI have a 2008 mazda miata mx-5 and the oxygen sensor is not passing. The gentlemen told me to drive 70 miles and come back. I drove the miles, came back,. ...Expand4
@
@jimmybondo31932 years agoI replaced both o2 sensors and cat and still cant pass emission test.
@
@OneximusVerseAI2 years agoNo matter what car i have cata clean never works.
@
@newfloridian57684 years agoGood video. But your voice almost fell asleep.
@
@TtgBfly0053 years agoThis video would' ve been better if you weren' t swallowing or having heartburn issues or whatever was going on. It was quite annoying. The information. ...Expand
@
@ludwigvoncocksucker327511 months agoDude i have a car i never drive im about to sell, a 2011 with 65k miles. No codes, nothing, garage kept, everything maintained at jeep dealership, the lady told me to drive 100 miles and come straight back to emmission. 1
Related videos for O2 Oxygen Sensor NOT READY for Emission TEST ▶️ o2 Sensor Monitor Incomplete:
Look HERE, Vehicle Spe cific Drive Cycles for your vehicle is below.
/>Complete Smog Playlist
12 Minute Actual Drive
Demo EMISSION INSPECTION MONITOR Readiness (I/M)
Acura Drive Cycle
Audi Drive Cycle
BMW Drive Cycle
Chrysler Smog Readiness check
Chrysler Smog procedure
Ford Drive Cycle
Gm Drive Cycle
Honda Drive Cycle
Honda Smog Readiness
Hyundai Drive Cycle
Infiniti Drive Cycle
Isuzu Drive Cycle
Jaguar Drive Cycle
Kia Drive Cycle
Land Rover Drive Cycle
Mercedes Benz Drive Cycle
Mini Cooper Drive Cycle
Mitsubishi Drive Cycle
Nissan Drive Cycle
Porsche Drive Cycle
Subaru Drive Cycle
Volkswagen Drive Cycle
Volvo Drive Cycle
Catalyst monitor not ready?
Catalyst Monitor Cheat
Catalyst not ready? Watch this video
Evap monitor not ready?
EGR monitor not ready?
Oxygen sensor not ready?
Oxygen sensor replacement
Oxygen sensor heater element testing
Link to Scanner in video
Video about recommend Full Color Scanner
Link to this full-color scanner
Lucas Fuel Treatment
Car Memory / Data Saver
Link to Scanner in video
Video about recommend Full Color Scanner
Link to this full-color scanner .. ...Expand
Or bank 2 ( the opposite side).
For single exhaust cars most of time, bank 1 is upstream. .. ...Expand 1
i' ve tried driving pattern recommeneded by nissan official document in last 2 weeks. It' s driving pattern is not very general as seen in many post. No success after 5, 6 try.
upstream cat (near engine) was not tested for temerature difference, as i am not sure how to test it.
before changing flex pipe, cat + o2 not ready (no code) issue existed few months ago. I' ve attempted to get rid of it by clearning, such as mass sensor.
the car idle is not 100% smooth, but ok. The car has no otherr know obvious issue.
what should i to get rid of at least 1 of cat + o2 not ready issue? Thank you for help and advise. ...Expand 1
monitor catalyst: not ready
monitor o2: not ready.
i was told by the shop that i need to drive it for an hour or two over 60mpb to have it activated then come back. But ive driven the car for 500+ miles, shouldnt that have gotten it ready?
someone please help. ...Expand